广州南洋电缆有限公司无卤阻燃热塑料弹性体绝缘热塑料弹性护套电动汽车传导直流充电系统用电缆
Non-halogen flame retardantthermoplastic elastoplastic elastic sheath DC Charging EV Cable
TÜV电动汽车直流流充电系统用电缆DC Charging EV Cable
标准：Standard: CQC 1103-1105-2015, DEKRA K175-2, GB/T 33594-2017
CQC证书号CQCCertificate No: CQC17011172877
TUV证书号TUV Certificate No:CH 50317687 0001, CH 50317692 0001, CH 50317694 0001
DEKRA证书编号 DEKRACertificate No: 6004027.01ds
1.应用范围
本电缆由铜导体、热塑性弹性体绝缘、热塑性弹性体内护套（需要时）、镀锡铜丝编织屏蔽（需要时）、热塑性弹性体护套组成。采用第五类/第六类铜导体绞合而成，产品手感舒适，柔软耐弯折。选用无卤阻燃热塑性弹性体，其具有阻燃性能好、耐磨、耐碾压、耐酸碱、耐油污、耐水、抗开裂、抗紫外线等优越性能。本电缆可应用于干燥或潮湿环境中，适用于电动汽车充电桩，电动汽车充电枪等充电设备使用。阻燃性符合GB/T18380.12-2008单根阻燃标准要求。
The cable is composed of copper conductor,thermoplastic elastomer insulation, thermoplastic elastomer inner sheath(optional),tin-coated copper wire braid (optional) and thermoplastic elastomer sheath. Thecable could demonstrate excellent flexibility with class 5 & class 6 copperconductor stranded, and excellent flame, abrasion, acid and alkali, oil, water,cracking, ultravoilet resistant characteristics performance due to halogenicfree and flame-retardance theromplastic elastomer material application. Thecable is applicable for both dry or wet occasion and designated for electriccar charging ile, electric car charging gun use. It’s flame chacteristic alsocould meet GB/T 18380.12-2008 standard requirement.
2.产品描述
结构Construction/材质Material
结构Conductor: 裸铜Bare copper
绝缘Insulation:TPE, XLPO
填充Filler:PP绳 PP Cord
包带Tape: 无纺布Non-woven fabrics
护套Sheath: TPE, TPU, XLPO
成品颜色Color: 依客户要求Customer request
3.电缆特性
额定温度Rated temperature:-40℃~+90℃
额定电压Rated Voltage: DC 1KV
绝缘电阻Insulation Tensile Strength : ≥10N/mm2
绝缘抗张强度Insulation Resistance: ≥0.037MΩ·km at 60℃
绝缘断裂伸长率InsulationTensile Strength: ≥300%
耐压试验Dielectric Volatge: 2.5kVac/15 min , No Breakdown
护套抗张强度Sheath Tensile Strength:≤4%
护套断裂伸长率Sheath Elongation: ≥300%
抗挤压C入手resistance： S≤4Sq≥4kN, 4S≤3Sq≥11kN，S＞35Sq≥15kN
护套热冲击Hot Shock: 150±2℃1h, No cracks
低温冲击Low temperature impact：-40℃
抗撕裂强度Tearing resistance Tensile Strengteh: ≥20N/mm
耐酸碱Resistance to Acid and alkali:
168h, Tensile Strength ≤30%,Elongation≥100%
最小弯曲半径Min：Bending Radius: ≥6D
环保要求Environmental Requriements: ROHS and REACH
