广州南洋电缆有限公司-道路车辆用高压电缆

High voltage cables for road vehicles

(AC 600V/DC 900V非屏蔽高压电缆,AC 600V/DC 900V non-shieldinghigh-voltage cable)

参考标准Standard:QC/T 1037、ISO 6722-2011、ISO 14572-2011、GB/T 25085、GB/T 25087

1.应用范围

本电缆铜导体/镀锡铜、无卤环保绝缘、镀锡铜丝编织屏蔽（需要时）、无卤环保护套组成。由于采用由第五类/第六类铜导体绞合而成，产品手感舒适，柔软耐弯折。选用无卤环保材料，其具有阻燃性能好、耐磨、耐碾压、耐酸碱、耐油、耐水、抗开裂、抗紫外线等优越性能。本电缆可应用干燥或潮湿环境中，适用于电动汽车连接充电口与电池、电池内部、电池与发动机及其他元器件，对于布线环境具有弯曲半径达到5D以下。

The cable is composed of copper conductor, thermoplasticelastomer insulation, tin-coated copper wire braid  (optional) and thermoplastic elastomersheath. The cable could demonstrate excellent flexibility with  class 5 & class 6 copper conductorstranded, and excellent flame, abrasion, acid and alkali, oil, water, cracking,ultravoiletresistant characteristics performance due to halogenic free andflame-retardance  theromplastic elastomermaterial application.The cable is applicable for both  dry or wet occasion and designated forelectric car charging interface, car battery ,motor generator and car chargingcomponent use.its maximum bending radius could reach 5 times of theoveralldiameter of the cable.

2.产品描述Product description

结构Construction/材质Material

导体Conductor: 裸铜Bare copper

绝缘Insulation: XLPE、XLPO、SIR

屏蔽Shielded: 镀锡铜Tinned Copper

护套Sheath: XLPE、XLPO、SIR

成品颜色Color: 依客户要求Customer request

3.电缆特性Features

额定温度Rated temperature: -40℃~+125℃、150℃、175℃

额定电压Rated Voltage: AC 600V/1DC 900V

短期老化Short-term Aging:240h,Comply with

长期老化Long-term Aging:3000h,Comply with

燃烧测试Flame Test:Comply with QC/T 1037

耐压试验Dielectric Volatge: 5kVac/5min,No Breakdown

最小弯曲半径Min BendingRadius:4*D(<15mm) ,6*D(≥15mm)

热收缩Heat shrinkable: 150±2℃/15min1, Insulation<2mm,Sheath<4mm

低温冲击Low temperature impact:-15°C,No Breakdow

耐油Oil Resistance:Comply with QC/T 1037

环保要求Environmental Requirements:ROHS and REACH